Research use resources

Cerebrolysin powder: what is in a 60mg vial, and how it is tested

Two Prestige research vials

Cerebrolysin is one of the few materials we carry that is not a single compound. It is a mixture, and that changes what its lab report looks like and what you check on it. This guide covers what is in our 60mg vial, why it comes as a powder, and what a Cerebrolysin certificate of analysis (COA) should show. For the basics of any report, see How to read a peptide lab report.

The short version

FormA lyophilized (freeze dried) powder in a sealed 60mg glass vial. Not a liquid.
What it isA mixture of low molecular weight peptides and free amino acids, not one molecule.
Its profileA report shows the spread of peptide sizes, not one purity peak.
ContentTotal peptide content and free amino acid content, in line with earlier lots.

Powder or liquid?

Cerebrolysin is sold in more than one form, which is why “powder or liquid” is one of the most searched questions about it. Ours is a powder: Cerebrolysin 60mg comes lyophilized (freeze dried) in a sealed glass vial, one size, 60mg.

Freeze drying removes the water from a material while it is frozen, leaving a dry cake or powder. For a research material that is a practical choice: a dry powder is far more stable than the same material in water, it can be stored for longer, and the milligrams on the label describe the material itself rather than a volume of liquid.

What Cerebrolysin is made of

Cerebrolysin is a mixture of low molecular weight peptides and free amino acids prepared from porcine brain protein. “Low molecular weight” means short chains: the protein is broken down into many small peptides, together with single amino acids that are no longer joined to anything.

That has one big consequence for its paperwork. A single peptide has one sequence, one exact mass and one main peak on a trace. Cerebrolysin has none of those. There is no single formula or molecular weight to print, because the vial holds a population of related peptides of different lengths.

One compoundone main peakA mixturea spread of peptide sizesTime in the columnLarger peptides to smaller
An example drawing, not a real result. A single peptide is judged by how much of the signal sits in its one main peak. A mixture like Cerebrolysin is judged by the shape of its whole profile.

How a mixture is tested

Labs describe a mixture by its profile: what is in it and in what proportion. For Cerebrolysin, a report looks at three things.

  • The spread of peptide sizes. Size exclusion chromatography sorts the peptides by size, larger ones first, and draws a profile across the whole range. Mass spectrometry can do a similar job by weighing the peptides present. Either way, the result is a picture of the whole population, not one peak.
  • Free amino acid content. How much of the material is single amino acids rather than peptides.
  • Total peptide content. How much of the powder is peptide at all, as opposed to free amino acids, salts and water.

None of those is a single pass or fail number like the purity of a single peptide. They are compared lot to lot: a good lot looks like the lots before it. That is also why recording the lot number of every vial matters even more for a mixture than for a single compound. For how a single peptide’s purity and content differ, see Purity vs content.

How it differs from a blend

A peptide blend also holds more than one compound, but it is a handful of named, separately made peptides mixed in set amounts, and its report lists each one with its own milligrams. Cerebrolysin is not built that way: its peptides come from one source protein and are not named one by one. For what a true blend report shows, see How to read a lab report for a peptide blend, and compare our peptide blends.

Our Cerebrolysin lab reports

No lab report is posted for the current Cerebrolysin lot yet. Reports are linked on the Cerebrolysin product page under Lab results as they come in. Until then, contact us and we will send the documentation for the lot you receive. We say this plainly on purpose: a report that is missing should be marked as missing, never filled with numbers from another product or lot.

Storing the powder

Our product page lists sealed vials at minus 20 °C or colder, dry and away from light. Small peptides and free amino acids can take up moisture from the air, so keeping the vial sealed and letting a cold vial reach room temperature before opening it both matter. For the reasons behind each step, see How to store lyophilized peptide vials.

Checking a Cerebrolysin report, step by step

  1. The name and lot: Cerebrolysin, with a lot number that matches the lot on your vial.
  2. The profile fits the description: mostly low molecular weight peptides with free amino acids, and no unexpected large proteins.
  3. Total peptide content and the spread of peptide sizes in line with earlier lots.
  4. The amount in the vial close to or above its labeled size, 60mg.
  5. The lab named on the report, so the report can be traced back to it.

Common questions

Is your Cerebrolysin a powder or a liquid?

A powder. It is lyophilized (freeze dried) and comes in sealed glass vials of 60mg.

Why is there no molecular weight for Cerebrolysin?

Because it is a mixture of many peptides of different lengths, not one molecule. Its reports describe it by its profile instead.

Is Cerebrolysin a peptide?

It is a peptide preparation: mostly short peptides, with free amino acids alongside them. It is not a single peptide with one sequence.

Where do I find the Cerebrolysin report?

On the Cerebrolysin product page under Lab results once it is posted, and on our research materials page, which lists every report.