Research use resources
How to read an ILS Laboratories COA

From November 2026, every new lot we sell is tested by ILS Laboratories, an independent lab in San Diego. Their certificate of analysis (COA) is the report you will see most often on our product pages from now on, so this guide goes through it line by line, using our own ILS certificate for the Reta 30mg lot as the example. For the basics that apply to any lab, see How to read a peptide lab report.
The short version
The top of the certificate
The first lines tell you who made the report and who it was made for. An ILS certificate starts with the lab’s name, its street address in San Diego, its phone number and its website, ils-lab.com. Under that is the product and the labeled amount, an overall verdict (ours reads PASS), and a line that matters more than it looks:
Tested for: Prestige Peptides, www.prestigepeptides.us. That line names the client. A report that names the seller you are buying from was made for that seller’s sample. A report with another company’s name on it, or with the client covered up, tells you much less about the vial you would receive. For the rest of what to look for in a seller’s reports, see our supplier checklist.
The sample details
Next comes a block of fields that tie the certificate to one physical vial. Here is what each one means, with the values from our Reta 30mg certificate.
| Field | What it tells you |
|---|---|
| COA # | The certificate's own number. Ours for the Reta 30mg lot: COA-2026-KUDA2P. Quote it when you ask the lab about the report. |
| Lot Number | The batch the sample came from, as written on the vial. Ours: 20261030, the same lot printed on the vial's label. |
| Labeled Content | The amount the vial is sold as. Ours: 30mg. |
| Volume | The size of the vial the sample arrived in, as the lab recorded it. Ours: 3mL. |
| Cap Color | The color of the vial's cap, recorded so the lab can match the certificate to the physical vial it received. |
| Date Received | When the vial reached the lab. Ours: November 2, 2026. |
| Analysis Date | When the lab ran the tests. Ours: November 9, 2026. A report describes the sample on this day. |
| Method | Purity, Identity & Quantitation (HPLC): one HPLC run gives all three numbers. |
The two dates are worth a second look. Ours shows a week between receiving the vial and testing it. What you want to avoid is a report whose analysis date is long before the lot could have existed, or a report with no dates at all.
The results table
The heart of the certificate is a table with five columns: Analyte (what was measured), Specification (the pass mark), Result, Unit and Status. Our Reta 30mg certificate has four rows.
| Analyte | Specification | Result | Status |
|---|---|---|---|
| Peptide Purity (HPLC) | 95.0% or higher | 99.71% | PASS |
| Net Peptide Content | Report only | 30.8 mg | Not graded |
| Identity (HPLC RTM) | The named compound | Confirmed | PASS |
| Fentanyl Screen | Immunoassay, 50 ng/mL cutoff | Not detected | Not graded |
Peptide Purity (HPLC)
The share of the HPLC signal that belongs to the main peak, the compound named on the certificate. ILS prints its pass mark next to the result, 95.0% or higher, so you can see the margin at a glance. Our lot read 99.71%.
Net Peptide Content
The milligrams of peptide the lab found in the vial. ILS marks it “Report only”: it is a measurement, not a pass or fail. This is the number to compare with the labeled content. Ours found 30.8 mg in a vial labeled 30mg. For why content and purity are different numbers, see Purity vs content.
Identity (HPLC RTM)
RTM stands for retention time match. The lab runs a known reference standard of the compound on the same HPLC system and checks that the main peak in our sample comes off the column at the same time. A match is reported as Confirmed. It is a different method from mass spectrometry, which weighs the molecule; both are used to confirm identity, and a certificate should always say which one it used.
Fentanyl Screen
A screen by immunoassay, with a cutoff of 50 nanograms per milliliter. Ours: not detected. It checks for one specific contaminant and nothing else, so read it as exactly that.
Checking that an ILS certificate is real
An ILS certificate carries a QR code with the line “Scan to verify authenticity at ils-lab.com”, and an access code printed beside it. That points you to the lab’s own record of the certificate, so you can compare it with the copy in front of you. If the numbers match, the copy you have is the one the lab issued.
On our side, a size with an ILS lot opens its certificate inside our website under Lab results, and the QR code on the vial’s label opens the same certificate for the lot printed on that label. So there are two separate links back to the same document: one from the vial, one from the lab.
What an ILS certificate can’t tell you
Like any report, it describes the sample the lab received, on the day it was tested. It doesn’t cover how the material was stored afterwards, and it doesn’t approve a material for any use. Our products are sold for laboratory research only, not for human or animal use.
Reading an ILS certificate, step by step
- Tested for: the seller you are buying from, by name.
- Lot Number and Labeled Content match your vial’s label.
- Peptide Purity above the printed pass mark, with the margin you expect.
- Identity: Confirmed, with the method named.
- Net Peptide Content close to the labeled content.
- Verify it: scan the QR code or use the access code at ils-lab.com.
Common questions
Which of your products have ILS certificates?
The first is our Reta 30mg lot 20261030 (99.71% purity, 30.8 mg found). New lots of every product go to ILS from now on, and each certificate appears on its product page under Lab results as it comes in. Our Reta lab report guide compares it with Reta’s earlier reports from other labs.
Why does Net Peptide Content say “Report only”?
Because it is a measurement, not a pass or fail. The lab reports the number, and you compare it with the size on the label: 30.8 mg found in a 30mg vial, in our case.
Is HPLC RTM as good as mass spec for identity?
They answer the same question in different ways. A retention time match compares the peak with a known reference standard on the same system; mass spectrometry weighs the molecule. Mass spec is the more specific of the two, and both are accepted ways to confirm identity. What matters is that the certificate names its method and that it reads Confirmed.
Where do I find your ILS certificates?
On each product page under Lab results, and on our research materials page, which lists every report. You can also browse our research peptides and peptide blends and open any size’s report from its page.